Vinyl/Aluminum Spraying & Painting
Our team of painters specialize in painting/spraying vinyl, aluminum siding, windows and trim. We use specialty paints which strongly adhere to vinyl & aluminum surfaces and prevent them from peeling or warping (even if you are using a dark colour). We spray these paints to ensure that your vinyl or aluminum siding, windows, trim have a factory finish!
Our Vinyl / Aluminum Painting Projects
Our Vinyl / Aluminum Painting Process
Step 1 - Set up / Masking
The first step of painting vinyl or aluminum surfaces is to mask and protect the surrounding areas. Our painters typically spray these surfaces so we must ensure that the surrounding areas are covered from over spray. This means covering the floors with drop cloths, taping/covering window panes, covering areas around windows and siding with paper or plastic.
Step 2 - Cleaning
Vinyl & aluminum are very fussy surfaces. To ensure proper adhesion, they must be completely clean. Our team typically pressure wash vinyl/alumnimum windows and clean vinyl windows by hand using a TSP detergent. This is then followed up a wipe down using acetone to remove grease and other potential contaminants
Step 3 - Painting, unmasking & Clean up
After all the difficult prep-work is done, our painters carefully spray on 2 coats of paint. Vinyl & aluminum surfaces are very slick and show imperfections. A spray application avoids brush/roller marks and ensure the surfaces look factory finished.
Once the vinyl / aluminum have been sprayed, we must unmask all of the surfaces. This might sound simple, but we cannot just simply rip off all of he tape, plastic and paper. We must do it slowly and use a razor along the edges to ensure that any "bridging" is cut so that the tape does not pull off the paint while it is being removed.
Our Reviews
5/5
Lorne Bossin
We recently hired Finesse Finish Painters for the third time. This time they stained our deck. Ramone and the entire team did an excellent job of sanding the deck and then appling two coats of stain. Vince is an excellent communicator and organized the job throughout. The deck looks fantastic and the job was completed in the requested time frame. We really appreciate the job they did and the time spent. I would highly recommend them for any painting job inside or outside!
2025
- 145Page 2
Vinyl / Aluminum Painting FAQ
Q: How long will painted vinyl / alumnum last?
Exterior paint jobs in Toronto usually last around 5 years before they start to peel or need a maintenance coat. However, this depends on many factors such as the amount of sun and weather exposure. Vertical surfaces that are covered or shaded tend to last longer than surfaces which are uncovered and facing the sun.
Q: Can I paint my vinyl black or a dark colour?
A: The short answer is yes you can paint your vinyl black or a dark colour. We use a specialty paint called RennerPlast which is purpose-made for vinyl (the same stuff they use in the factory). This paint will NOT cause the vinyl to warp even if you are painting it black.
Vinyl is sensitive to sunlight because the surface can heat up depending on the colour. The reason many people say that you cannot paint vinyl dark/black is because the vinyl will absorb too much light, heat up and warp or fail. This is true for most types of paint. HOWEVER, we use RennerPlast which is a special paint that will not cause warping.
Q: Do you prime the surfaces before you paint?
A: The two types of paint we use can be applied directly to vinyl or aluminum. Priming is optional with these products.
Q: Do you have a warranty on your work?
A: We guarantee all of our exterior work for 2 years except for horizontal surfaces that are walked on (ex, floors). If anything peels prematurely, we will come back and fix it.
Q: Does your company have liability insurance?
A: Our company has up to $2,000,000 in liability insurance.
Best Paints for Vinyl / Aluminum Painting & Spraying
#1 RennerPlast
Our top pick for vinyl & aluminum painting is RennerPlast. This specialty product was purpose-made for vinyl & aluminum surfaces (same product they use in factories). The main benefit of this product is that you can paint your vinyl black or any dark colour without worrying about they vinyl warping. RennerPlast is a 2-part paint which is mixed with a hardener to ensure a durable and long lasting paint job.
2 Year Warranty
Our team offers a 2 year warranty on most exterior painting projects. If your paint job starts peeling prematurely, we will touch it up for free.
Efficient & Dustless
Our team is equipped with the top of line dustless sanding equipment which allows us to prep your house in less time, keep your house clean, and save you money.
Daily Updates & Cleaning
We send daily video updates so that you know exactly what's going on without having to be there. Our crew always protect the surrounding areas and clean up daily so your house never looks like a mess.